Instructions for Installation & Use
- Series No. BS4900A-020130
Instructions for Installation & Use
- Series No. BS4900A-020130
43
42
C. To replace middle cover, engage plastic
flaps at booster wing upper and lower
as shown. Do not loop the elastic at
the bottom of the middle cover over the
booster seat. This remains at the front of
the booster seat. Insert wing cover edge
into the channel running along the edge of
the wings (see illustration).
B. To replace headrest, adjust the headrest height
to the highest position. Pull elastic over the air
cushions and tuck behind. Attach the elastic
loops to the hooks at the back of the red sash
guides. Refit cover around headrest. Ensure that
the headrest is tucked in the channel around the
red sash guides, so that the sash guide text is
clearly visible.
TO REPLACE COVER
A. To replace base cover, Slide on base cover
and feed SecureGuard™ Device and the base
adjustment knob through the cover. Fit the
elastic loops over the back of the base.
Engage
Plastic Flaps
into slots
Replace elastic from
behind air cushion
Hook elastic behind headrest
Feed the knob through slot
Hook elastic from underneath booster
Feed cover into channel
Engage
Plastic Flaps
in slots
B
A
A
CARE & MAINTENANCE
CARE & MAINTENANCE
Feed the
SecureGuard™
Device through slot
