Britax Safe-n-Sound BS4900A-020130 Series, Instructions For Installation & Use

Page: 11 / 27

Instructions for Installation & Use - Series No. BS4900A-020130 Instructions for Installation & Use - Series No. BS4900A-020130
21 20
HOW TO INSTALL HOW TO INSTALL
INSTALLING INTO VEHICLE
A. Position the restraint in the car facing-forward in the
chosen seating position. Adjust the headrest to the
correct height for your child (refer to page 17).
B. Lengthen the top tether strap and connect the
Attachment Clip to the vehicle upper anchorage
point making sure to remove as many twists as
possible.
To lengthen the top tether strap, fully press Adjuster
Button (A) while pulling top tether strap (B) to
slacken as shown right.
Ensure the seating position has a child restraint
anchorage fitting. Refer to your vehicle owner’s
manual for the location of the upper anchorage
point in the car. If the vehicle is not fitted with a
child restraint upper anchorage point then refer
to page 45 to 48 for the installation of the upper
anchorage point provided with this child restraint.
C
Store excess strap and
store in pocket attached
to the seat cover.
Pull Adjustment Strap
to remove slack
Top Tether Attachment Clip
Car's Upper Anchorage Point
B
A
Fully press Adjuster Button (A)
while pulling top tether strap (B)
to lengthen.
Pull to remove slack
Always attach the hook and
remove slack
C. Tighten adjustable top tether strap by pulling
adjusting strap (C) to remove slack, but do not
over-tighten causing the restraint base to lift off the
vehicle seat.
Always secure the loose end of the top
tether strap to prevent it hanging out of
the car or being accessible by the child.
D. Roll up excess strap and use storage pocket to
neatly store away from child's reach.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP DAMAGED
BY UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD RESTRAINT.
The backrest pivots freely so as to match the car seat back angle. Move the restraint back until
it is touching the car’s seat back. If the vehicle seat back angle is adjustable put it in the normal
upright mode.
Normal
backrest
angle
Backrest angle
too reclined
ADJUSTING THE CAR'S SEAT BACKREST
NOTE:
In some vehicles, the vehicle headrest
may need to be raised or even removed to allow the
booster seat to sit correctly, the vehicle headrest
may also interfere with the routing of the upper
anchorage strap. If removed, store the vehicle
headrest in a safe place.
CHILD USE
(BOOSTER SE
AT
MODE)
CHILD USE
(BOOSTER SE
AT
MODE)