Instructions for Installation & Use
Instructions for Installation & Use
24
25
Step 1.
Check the level indicator (black ball) is
in required range.
The Rearward Facing Level Indicator shows
when your child seat is installed at the correct
angle for your vehicle. It gives you confidence
the child seat is positioned correctly whenever
you travel.
REARWARD FACING LEVEL
INDICATOR:
ANGULAR ADJUSTMENT OF
RESTRAINT
Some vehicle seats have more rearward slope
than others. The angle may be adjusted by
placing a firm packing between the child seat
and the underside of the base. Packing can be a
firmly rolled up towel (see figure A).
If the vehicle seat is flat then some packing may
be required at the front edge of the base to
achieve the recline angle (see figure B).
Always check that the rearward facing level
indicator confirms the correct installation angle for
rearward facing mode (see page 24).
SETUP
- RECLINE ANGLE FOR
REARWARD FACING
SETUP
- RECLINE ANGLE FOR
REARWARD FACING
1
Black ball not visible
IMPORTANT:
This indicator should only be used in rearward
facing mode.
Figure .A.
Figure .B.
If the black ball is not visible, the child seat
angle may be adjusted by placing firm packing
between vehicle seat and base (see page 25).
