Instructions for Installation & Use
Instructions for Installation & Use
54
55
Step 8.
Engage Buckle
ENSURE BUCKLE IS ALWAYS
CONNECTED DURING USE.
ENSURE ALL HARNESS STRAPS ARE
NOT TWISTED.
Step 9.
Remove all slack from the lap strap
area (including behind child's bottom),
by pulling up on the shoulder straps.
Step 10.
Pull harness adjuster strap to
tighten.
Ensure a firm but comfortable fit.
ENSURE ALL HARNESS SLACK IS
REMOVED.
WARNING:
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
10
9
Tongue
Buckle
Shoulder
Strap
Lap
strap
8
1
SETUP
- OPEN ADVANCED
SIDE IMPACT CUSHION
TECHNOLOGY FOR FORWARD FACING
NOTE. The SICT system should not be
used if the child seat is in the centre
position.
For further information on SICT refer to
page 9.
Step 1.
Rotate the SICT anti clockwise to full
extension on the preferred door side
for both the torso and headrest.
Headrest SICT should only be
used if it is exposed in the 4
highest positions of the headrest.
If at full extension the SICT makes
contact with the vehicle interior, reduce
the extension by rotating clockwise,
keeping it as close as possible to full
extension (finger clearance)
OPEN ADVANCED SIDE IMPACT
CUSHION TECHNOLOGY:
SETUP
- HEADREST AND SHOULDER HARNESS
FOR FORWARD FACING
Pull
