21
8
Assembly
1.
Push the release lever on the chassis lock
and open the frame.
Unfolding
2.
Lift handle until frame locks into upright
position. Push down on the stroller handle
to confirm it is locked.
1.
Slide the front wheel mounting pin into the
stroller housing until you hear an audible
‘click’.
2.
Pull wheel to ensure that it is secure in
housing.
Front Wheel
1.
Slide the rear wheel pin into the rear axle
mounting bracket until it locks into place.
The wheels are labelled left and right
(child’s left or right from the seated
position).
2.
Pull wheel to ensure that it is secure.
Rear Wheels
R or L
Infant Car Seat Mode
3.
Release the handle latches and push the
Infant Car Seat handle all the way down until
you hear it lock into the receivers.
Attaching BOB Unity
Infant Car Seat
(Continued)
IMPORTANT:
ENSURE THAT THE INFANT CAR SEAT
IS LOCKED INTO PLACE BY PULLING UP ON BOTH SIDES. DO NOT
USE THE INFANT CAR SEAT IF IT IS NOT CORRECTLY INSTALLED.
Please Note: The infant Car Seat has been fitted with a hood
when using the stroller. The hood can also be used in the car.
Refer to the Infant Car Seat Instructions regarding placing and
securing your baby in the Infant Car Seat.
