18
11
Operating Instructions
Parking Brake
WARNING:
ALWAYS APPLY THE BRAKES
WHEN THE STROLLER IS NOT MOVING. THE STROLLER
MAY ROLL AWAY EVEN IF LEFT UNATTENDED FOR A FEW
MOMENTS.
1.
Press the parking brake pedal down to lock
the brake. Lift the brake pedal to release the
brake.
2.
To ensure the brake is set properly,
attempt to roll the stroller forward and
backward after setting the brake. If the
stroller will not roll, the brake is set properly.
NOTE: Locking the brake locks both back wheels
Swivel Wheel Locks
1.
Lift the swivel lock lever up to lock the front
wheel. Press the swivel lock lever down to
unlock the front wheel.
NOTE: Always lock the swivel wheel when using the stroller on
rough surfaces as it will minimise wheel wobble.
Infant Car Seat Mode
• THE UNITY BOB INFANT CAR SEAT IS THE ONLY INFANT CAR
SEAT DESIGNED TO FIT THIS STROLLER.
• THE INFANT CAR SEAT MUST BE CORRECTLY FITTED AND
LOCKED ONTO THE STROLLER.
• THE INFANT CAR SEAT MUST ONLY BE USED IN THE
REARWARD FACING POSITION, FITTED TO THE STROLLER
FACING TOWARD THE STROLLER HANDLE.
• SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
• DO NOT LEAVE THE CHILD IN THE INFANT CAR SEAT FOR
EXTENDED PERIODS.
• THE INFANT CAR SEAT IS DESIGNED TO PROVIDE MOBILITY
OUTSIDE OF THE CAR BUT IT SHOULD NOT BE USED
INSTEAD OF AN APPROPRIATE COT.
• THE INFANT CAR SEAT MUST BE REMOVED FROM THE
FRAME BEFORE FOLDING.
• THE MAXIMUM WEIGHT OF THE CHILD USING THIS
PRODUCT IS NOT TO EXCEED 12kg.
Please Note: These Instructions are for installing and removing the
Infant Car Seat on the stroller only.
For installing and proper care of the Infant Car Seat in the car
please follow the Instruction book that is included with the Infant
Car Seat.
WARNINGS
