Warnings
WARNINGS:
TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER
IS STATIONARY.
• FOLLOW THE MANUFACTURERS INSTRUCTIONS.
• DO NOT LEAVE CHILDREN UNATTENDED.
• SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU
ADJUST THE STROLLER.
• USE THE HARNESS AT ALL TIMES.
• WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE
WAIST STRAPS AND BUCKLE TO PREVENT STRANGULATION.
• Check that all safety locks are engaged before placing a child in the
stroller.
• Ensure your child is secured with a correctly adjusted safety harness.
• Use the tether strap to prevent the stroller from rolling away.
• Never let go of the stroller when parked on an incline because it may
slide or tip over. Always park on a flat surface.
• Remove the child from the stroller before going up or down stairs or
escalators.
• DO NOT allow children to stand on the seat.
• DO NOT hang or place items on the stroller handle or frame except
those approved by Britax. They may cause the stroller to become
unstable and tip over.
RETAIN FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE
OF THIS STROLLER. ALWAYS FOLLOW THE INSTRUCTIONS.
THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS
ESSENTIAL.
3
26
Care and Maintenance
Storage
• Store in a well ventilated area.
• Store away from extreme heat to prevent damage to plastic parts.
• Cover stroller to prevent dust build-up and exposure to sunlight.
• DO NOT stack other items on top of stroller.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
Maintenance
• If stroller gets wet wipe with a clean cloth or towel to prevent corrosion.
• DO NOT fold stroller when wet or damp. Always make sure that the
stroller is dry before storing.
• Always check parts regularly for tightness of screws, nuts and other
fasteners - tighten if required. To maintain the safety of your stroller,
seek prompt repairs for bent, torn, worn or broken parts.
• When using your stroller at the beach - completely clean your stroller
afterwards to remove the sand and salt from the mechanisms and wheel
assembly. Sand and salt will cause premature wear and corrosion.
