10
19
10
Assembly
Snap the support strap to the frame just
below the stroller handle and connect them
using the hook and loop fasteners on the
inside of the canopy.
2.
Attaching the Canopy (
Continued
)
Attach the hook and loop fasteners located
around the outer edge of the canopy and
back flap to the stroller.
3.
Infant Car Seat Mode
1.
Lock the parking brake. Pull the fabric back
from the sides to expose the frame mounts.
Align the receivers with the inside frame
mounts of the stroller. Receivers are labelled
Left and Right (child’s left and right from
seated position.)
2.
Push down until an audible ‘click’ is heard.
Pull up on each receiver to ensure they are
locked onto the frame.
Attaching Infant Car
Seat Receivers
1.
Squeeze the button on the receiver and lift
upward.
Removing Infant Car
Seat Receivers
