BRISTERS CHUCK WAGON, Operator'S Manual

Page: 4 / 68

Section 1 Introduction
Always use the serial and model number when ord
arts r your Brister Utility Vehicle. The serial-num
ering
fo ber
The Brush Guard Bar also provides a mounting system
for Brister’s optional windshields, canopy tops and
weather enclosures. It also serves as a mounting base
for many other optional cargo racks, gun and bow racks
The cargo bed is for transporting accessories such as
camping equipment, tree stands, hunting gear, and
fishing gear. A standard hitch moun
.
ting plate enables
uick installation of a rear hitch for pulling small trailers
an
ll
and narrow stance also
nables this vehicle to be loaded in the back of most full
ransport.
is
ards.
ed by the owner
nd the Warranty Registration card should be filled out
sary to provide you with quality
customer service.
T
have been spec
replaced with g
If customer service or repair parts are required contact a
Brister’s dealer. They have trained personnel, genuine
repair parts and equipment specially designed to repair
Brister’s products.
Product Support
Brister’s Design & Manufacturing Co. LLC
P.O. Box 649
Roseland, LA 70456
Toll Free PH: 1-866-646-5278
Fax: 1-866-329-5278
service@bristers.com
p
plate is located under the cargo bed on the driver’s side
just above the engine, on the frame as shown in figure 1
below.
q
full of supplies, tools, gear, and game.
The Brister Utility Vehicle has some similarities to
ATV. Like an ATV the Brister Utility Vehicle has a short
wheelbase, narrow stance, and high center clearance a
which provide for narrow and difficult trail access. This
combination of short wheelbase
e
to mid-sized pickups for t
The Brister Utility Vehicle’s ground compaction and is
very gentle on the ground and surrounding vegetation.
The highly energized four wheeled independent
suspension system provides an incredibly soft ride and
outstanding stability over difficult terrain. The engine
EPA certified and meets California Air Resources Board
ARB) certification (C stand
Owner Assistance
The safety information should be view
Serial Number Plate Location
_________________
Your Brister’s dealer ur
f this
r you’re not satisfied with the service received,
t e the llowing actions.
Discuss the matter with your dealership service
manager. Make sure they are aware of any problems so
they can assist you.
If you are still unsatisfied, seek out the owner or general
manager of the dealership.
For further assistance write to
Figure 1
Record your Brister Utility Vehicle serial number here for
quick reference:
a
by the dealer at the time of purchase. The owner, upon
purchasing the vehicle, should have participated in a
short drivers training course with the dealer. This
information is neces
Model Number:___________________________
Serial Number:___________
he parts on your B le Utility Vehicle rister Utility Vehic
designed and sho
wants you to be satisfied with yo
ou do not understand any part o
ially uld only be
enuine Brister’s parts.
new vehicle. If y
manual o
please ak
fo
4