BRISTERS CHUCK WAGON Operator'S Manual Download Page 10

Page: 10 / 68

__ Check throttle control to make sure it moves and
returns freely.

__ Fluid fill and lubrication points have been located and
explained to the customer.

__ Check differential oil level at the differential oil plug.

cleanliness and for

ealer Test Ride List

sponse. Also check neutral start response.

k parking brake to make sure it engages, holds,

nd disengages.

_ Make sure throttle is responsive and returns freely.

sion ride is satisfactorily and

table.

re there are no fuel or petroleum leaks.

gement and

tration form is complete.

mer.

ustomer.

_ Fuel transportation and storage procedures have

__ Information on the safety decals have been reviewed
with the customer.

Add 30 weight oil if oil is low.

_ Check overall appearance for

Customer Acceptance List

_
body and molding damage.

Customer initials required where accepted as
successfully completed.

__ Check engine for starting, accelerating, runni
smooth, and idling smoothly.

__ Customer has reviewed and understood warranty
policy (ies).

__ Check steering response. There should be no free
play.

__ Customer has inspected the vehicle and it meets
customer satisfaction.

__ Check forward, neutral, and reverse shifting

__ Customer understands the importance of following
the owner’s manual instructions.

__ Chec

__ Make sure the suspen

* IMPORTANT NOTICE *

__ Make su

WHEN TRANSPORTING ANY

BRISTER UTILITY VEHICLE

WITH A WINDSHEILD OR COLOR MATCHED

TOP DO NOT EXCEED 55MPH

__Make sure the foot brake has a firm enga
that stopping is straight.

__ Make sure there are no abnormal rattles or
vibrations.

Dealer Delivery to Customer List

__ Warranty regis

__ Owner’s Manual has been delivered to and reviewe
by the customer.

Brister’s Design & Manufacturing Co. LLC

Toll Free PH: 1-866-646-5278

Fax: 1-866-329-5278

__ Engine Manual has been delivered to and reviewed
by the custo

www.bristers.com

__Warranty Policy limits and requirements have been
explained to the c

__ Location and functions of vehicle controls have been
explained.

_
been explained.

Transportation of utility vehicle is limited to 55mph,

hen equipped with top and windshield

Summary of Contents for CHUCK WAGON





































































Search results

Summary of Contents for CHUCK WAGON

Reviews:

Related manuals for CHUCK WAGON

Brands by name

Popular brands

BRISTERS CHUCK WAGON, Operator'S Manual

Search results

Summary of Contents for CHUCK WAGON

Reviews:

Related manuals for CHUCK WAGON

Brands by name

Popular brands