================================================================================================
1019383-A
15
ASSEMBLY
•
DO NOT
wrap the pull rope around your wrists, fingers or ANY body parts.
•
DO NOT
use the pull rope while the towing vehicle is moving.
• Attach the pull rope as directed on pages 14-15 of this manual.
• Avoid overfilling the hamper. Heavy loads are more difficult to dump.
• Park towing vehicle and set the parking brake before dumping material.
• Use the handle that has been provided.
•
After dumping the hamper:
Always make sure to fully secure the Pull Handle to
the back of the towing vehicle using the Hook and Loop tape.
TO PREVENT ANY POTENTIAL INJURY OR DIGITAL AMPUTATION, PLEASE BE AWARE OF THE FOLLOWING:
29
66
37
35
3
37
5
33
35
36
To Towing
Vehicle
Two
Knots
35
36
37
37
To Sweeper
37
35
Step 17
Extend Pull Rope (37) to the
back of the towing vehicle to an
area that will be easily accessible
from the towing vehicle seat. This
is the area that the Pull Handle (35)
will be attached.
Allow the Pull Rope (37) to slacken several inches.
Droop between the towing vehicle & tied point on the Hamper.
Tie 2 knots in this area of the Pull Rope and drag the Handle (35) toward
the knots. Pull to secure their position on the rope.
Clean the area of the towing
vehicle that the Pull Handle (35)
will attach to.
Affix the adhesive Hook and Loop
(36) tape to the back of the towing
vehicle in the cleaned area.
CAUTION:
The pull rope
and handle can get tangled in
the sweeper brushes of the
sweeper during operation.
Cut and discard any excess
rope below the two knots that
have been tied.
29
66
37
35
3
37
5
33
35
36
Slacken
37
