================================================================================================
1019383-A
14
35
66
37
29
66
37
35
3
37
5
33
35
36
36
35
37
Step 16
24
5
Step 15
ASSEMBLY
5
33
5
29
33
29
3
3
Thread the
Pull Handle
(35) on the
opposite end
of the Pull
Rope (37) as
illustrated here.
Using the hardware in
PANEL 11
,
assemble Hamper Mounts (5) to Upper
Side Tubes (38) as shown here.
Assemble the following through the Upper
Side Tube (5) in the order listed below:
• Hex Bolt (15)
• Upper Side Tube (38)
• Spacer (6)
•
Hamper Mount (5)
• Large Washer (34)
• Nylon Lock Nut (25)
Use the hardware in
PANEL 12
while attaching the Hamper to
the Brush Housing.
*After this is complete,
detailed instructions for
attaching the sweeper to your
towing vehicle are available
on page 15.
Note: Tighten Nylon Lock Nut (25) completely and then loosen
enough so that the Hamper Mount (5) pivots freely.
Add the Vinyl Caps (24) to Hamper Mounts (5) as shown.
6
5
34
15
25
38
Tie one end of
Hamper Pull Rope (37)
to the middle section
of the upper
Rear Hamper
Tube (66).
