================================================================================================
1019383-A
8
Step 3
23
30
68
Step 4
ASSEMBLY
Using the rounded
measurement from the
previous step, determine the
correct Clevis Assembly (68)
mounting holes.
Once the correct Clevis
Assembly (68) mounting holes
have been determined, attach the
Clevis Assembly (68) between the
Right and Left Tow
Tubes (3 & 4) using
the hardware in
PANEL
02
( ) as it’s been
illustrated here.
Tighten all hardware used in
STEP
1
(6 Carriage Bolts and Nuts) and STEP
3
(3 Hex Bolts and Nuts).
Using the hardware in
Panel 03,
attach the Hitch Pin (23) and the Hairpin
Cotter (30) to the Clevis Assembly.
!
DO NOT
TIGHTEN
FASTENERS AT
THIS TIME.
Use the remaining
hardware from
PANEL
02
and attach
the Right and Left Tow Tubes (3 & 4)
at the 3rd hole as shown here.
7”
11”
68
3
4
32
14
25
68
4
32
14
25
3
7”
8”
9”
10”
11”
12”
13”
14”
68
3
4
32
14
25
68
4
32
14
25
3
7”
8”
9”
10”
11”
12”
13”
14”
8”
-9”
12”
-13”
10”
14”
Hitch plate
heights
between
7” & 10”
have the
Clevis
(U-shaped
extension)
at the
BOTTOM
of the
bracket
Hitch plate
heights
between
11” & 14”
have the
Clevis
(U-shaped
extension)
at the
TOP
of the
bracket
* Be sure to add the spacer (32) through the bolt between the tow tubes, closest to the Brush Housing (45).
