13
6. During the standby mode for steam function, the LED indicators of “POWER” and “STEAM/
PREHEAT” buttons illuminate. The appliance will exit from the steam function if press “STEAM/
PREHEAT” button again. And the water pump will work with the LED indicators of “One
Cup”, “Two Cup” buttons flash for cooling down the heater for the next working cycle.
And then the appliance will return to the standby mode. And the appliance will turn off
if press “POWER” button.
NOTE:
For steam function , the maximum working time is 2 minutes.
7. Under the standby mode, rotate the knob to“Hot water”position, the LED indicators of
“POWER”, “One Cup”and “Two Cup” buttons illuminate, and the water pump starts working
for the hot water function. Rotate the knob back to “OFF” position, the appliance will stop
producing hot water and return to the standby mode.
NOTE:
For hot water function, the maximum working time is 1 minute.
8. During brewing cycle, if there is no water in the water tank, the LED indicators of
“One Cup”, “Two Cup” and “STEAM/PREHEAT” buttons will flash and you can press
“Power”, “One Cup” or “Two Cup” to remove warning.
9. If the user wants to empty the water inside Espresso water tank after long time of no use,
hold and press both of “STEAM/PREHEAT” & “Two Cup” button for 3 seconds, the water
pump will work only to drain out the water until there is no water inside the water tank,
then the appliance will return to the standby mode.
10. Always turn the appliance off and disconnect the power supply when not use.
STANDBY MODE
The appliance will enter into sleep mode automatically if there is not any operation within
30 seconds under the standby mode.
TO TURN OFF OR TURN ON THE BEEP
To turn off the beep, simultaneously hold and press “PROGRAM” and “MINUTE” buttons for
3 seconds, the icon “
” shown in the LCD illuminates. To turn on the beep, simultaneously hold
and press “PROGRAM” and “MIN” buttons for 3 seconds again, the icon “
” will disappear
from LCD.
