Brillion Zone Commander ZM3302, Operator'S Manual

Page: 15 / 54

Pa
g
e
1
5
Figure 7
Offset Bracket (used in models where
normal placement interferes with mast).
U-BOLT, 3/4”
LOCK WASHER, 3/4”
NUT, 3/4-10 NC
NUT, 5/8-11 NC
COLLAR
3.
Coulter Assemblies
If your machine has cast mounting brackets
(denoted with number stamped along side of
casting) and coulters with round shafts:
Attach 6K678 mounting brackets to the
front tube with 3/4” 7 x 5 U-bolts. Collars
are used to attach front coulter to coulter
REAR OF
MACHINE
COLLAR
(2) SET SCREWS,
5/8-11 x 2” (SQ. HD)
(2) NUTS, 5/8-11 NC
9K162
504rev1-26-05
Page 13
6K678a Cast
MOUNTING
BRACKET
SET SCREW,
5/8-11 x 1” (SQ. HD)
NUT,
5/8-11NC
COLLAR
COLLAR
bracket on top and bottom. The tab on
the collar fits between the “ears” on the
casting to prevent rotation.
Attach coulter assemblies to each mounting
bracket. Slide the shank into the tube on
the bracket and hold in place with 3 set
screws and nuts as shown in figure 7.