Brillion Zone Commander ZM3302, Operator'S Manual

Page: 16 / 54

Pa
g
e
1
6
HHCS, 1/2-13 NC x 5”
If your machine is
equipped with welded
mounting brackets
and
single or dual coulters on
square shafts:
Attach 9K291 mounting brackets to the
front tube with 3/4” x 7 13/16” x 6 3/4”
U-bolts and lock nuts.
NOTE: Apply never-seize
to the posts to ease swivel
action and prevent any
binding that could occur.
(9K290
mount
bracket)
U-bolt, 3/4” dia.
Attach coulter assemblies
to each mounting bracket.
Slide the square shank between
the plates on the bracket and
hold in place with1/2-13 NC x 5”
capscrews, lock washers
and nuts as shown.
If you wish to use dual coulters on your machine, the
chart on the following page indicates where you will
need left- or right-hand mounting tube configurations
to fit them to your particular machine model.
(RH) 9K376
9K162
504rev9-22-05
Page 13b
HHCS, 1/2-13 NC x 3 3/4”
(LH) 9K377