Brillion Field Commander HFC16, Operator'S Manual, Assembly Instructions, Page: 48 / 64

2K314 194rev3-4-05 Page 35a
Assemble #4K869 bracket weldment to right side of Field Cultivator center frame. Locate bracket
3” forward of the longer shank mounting stub as dimensioned above. The bracket weldment
mounts to the inside of the frame tube with two #4K854 straps used as spacers between this brack-
et and cultivator frame. One #4K854 strap, on outside of frame, and two 1/2” x 3 1/2” capscrews se-
cure the assembly. See illustration above. Assemble the other bracket weldment in similar fashion
on left side of machine.
Attach lamp assemblies to bracket weldments (amber facing forward; red and amber facing rear-
ward with amber in outer-most position). See illustration above for fasteners required.
If your Field Cultivator is equipped with a rear hitch, for tandem towing another implement, you will
need to assemble the #4K846 tandem haul adapter to the rear hitch as shown on page 2 (Warning
lights from second implement can be plugged into this adapter so warning lights are fully functional
on both implements).
WARNING LAMP ASSEMBLY
#1C331
CAPSCREW 1/2”
x 31/2”
INSTRUCTIONS FOR #4K865 WARNING LIGHT KIT
#1C109 LOCKWASHER
#1C390 HEX NUT, 1/2”
FIELD CULTIVATOR
CENTER FRAME
REAR
#4K854 STRAPS
#4K773 R.H. LAMP
ASSEMBLY
#4K772 L.H. LAMP
ASSEMBLY
#2C312
MACHINE SCREW 1/4” x 1”
#6J150
LOCKNUT, 1/4”
#4K869
BRACKET WELDMENT
3”