Brillion Field Commander HFC16, Operator'S Manual, Assembly Instructions, Page: 22 / 64

2K314
DEPTH INDICATOR
SCALE
#8-32 x 1/2”
SELF TAPPING
SCREWS
LOCK
CYLINDER
ANCHOR ROD
DEPTH ADJUST
TUBE
2 7/8” O.D. COLLAR ATTACHED TO
ADJUST TUBE WITH 3/8” x 3” ROLL PIN
(2) 3 1/2” DIA. x 10
GAUGE MACHINE
BUSHINGS LOCATED
ON EACH SIDE OF
ANCHOR PLATE ON
CULTIVATOR FRAME
ANCHOR PLATE
1” O.D. BUSHING
ATTACHED TO ADJUST
HANDLE WITH 3/16” x 7/8”
ROLL PIN
CYLINDER ANCHOR ROD & ADJUST TUBE WITH DEPTH ADJUST SCALE (Detail)
FIGURE 11
1. Attach the bent scale to the lock.
DEPTH INDICATOR
SCALE #8-32 x 1/2”
SELF TAPPING SCREWS
194rev3-4-05 Page 19
Note: See the following page for special
additional instructions on Center Section
2. Turn the lock onto the cylinder anchor before
connecting the cylinder anchor to the depth adjust tube.
*Note: The lock must be positioned as shown with the offset part
toward the adjust tube.
THIS 3/16” x 1 1/2” ROLL PIN
MUST BE INSTALLED TO PRE-
VENT ANCHOR ROD FROM
DISENGAGING ADJUST TUBE
3. Turn the lock against the depth adjust
tube to keep it from turning.
FIGURE 11a
FLAT SCALE
ATTACHMENT
OFFSET (Faces
this direction)
WING SECTIONS