6
11
Apply the FOAM ADHESIVE STRIPS(18) around the inner edge of the DIFFUSER COVER(16). (Fig. 2)
10
Place the BACK PLATE(6) back onto the NIPPLE(4), and secure into place using the THUMB NUT(7) provided. (Fig.1)
Remove the BACK PLATE(6) and secure the position of the NIPPLE(4) by tightening the HEX NUT(3) against the MOUNTING BRACKET(2).
9
Place BACK PLATE(6) of the fixture over the OUTLET BOX(1) and onto the NIPPLE(4), and adjust the NIPPLE(4) unit protrudes out from the BACK PLATE(6) 1/4".
8
14
Restore power at fuse box/circuit breaker. Check operation of Integrated LED Fixture™.
15
Installation complete.
INSTALLATION (CONT.):
4
| ENGLISH
12
Attach the DIFFUSER COVER(16) onto the BACK PLATE(6) using the four COVER SCREWS(17). (Fig.1)
13
LED(19), Driver(20).
