BRIGHT OTF6000 Manual Download Page 56

Page: 56 / 72

1. Cryospray 1234ze Product Information

Trade/Type:

Bright Cryospray 1234ze

Freezing Agent.

Container:

Aerosol.

Uses:

Rapid Freezing of tissue specimens

to –52ºC.

Description:

Gases under pressure, Liquefi ed gas.

2. Hazards Identifi cation

Classifi cation of the

substance or mixture:

Classifi cation according to

Regulation (EC) No

1272/2008/EC (CLP/GHS):

Gases under pressure, Liquefi ed gas H280 Contains gas

under pressure; may explode if heated.

Label Elements:

Labelling Pictograms:

Signal Word:

Warning

Hazard Statements:

H280:

Contains gas under pressure; may

explode if heated.

Precautionary Statements:

P281:

Use personal protective equipment as

required.

P260:

Do not breathe dust/fumes/gas/mist/

vapours/spray.

P308 + P313:

If exposed or concerned: Get medical

advice/attention.

P410 + P403:

Protect from sunlight. Store in a

well-ventilated place.

Potential Health Eff ects:

Skin:

Rapid evaporation of the liquid may

cause frostbite.

Eyes:

May irritate eyes.

Ingestion:

Unlikely route of exposure.

Inhalation:

Inhalation may cause central nervous

system eff ects. Vapours may

cause dizziness and drowsiness.

Chronic:

None known.

General:

Warning. Container under pressure.

Potential Environmental

Eff ects:

An environmental hazard cannot be excluded in the event

of unprofessional handling or disposal.

Cryospray 1234ze

MATERIAL SAFETY DATA SHEET

Instruments

Office:

Bright Instruments LTD
Burnett House, Lakeview Court
Ermnie Business Park, Huntingdon
Cambridgeshire, PE29 6UA

Telephone: +44 (0) 808 168 9697
Email: [email protected]

Web: brightinstruments.com
Member:

Summary of Contents for OTF6000









































































Search results

Summary of Contents for OTF6000

Reviews:

Related manuals for OTF6000

Brands by name

Popular brands

BRIGHT OTF6000, Manual

Search results

Summary of Contents for OTF6000

Reviews:

Related manuals for OTF6000

Brands by name

Popular brands