Bright Instruments
33
2.2 CABINET CONTROLS CONT.
2.2.5 MOTORISED ADVANCE/REWIND
CONT.
Rewind
Advance
Ways to use the switch:
a. If the Advance/Rewind switch is pressed
for more than 1.5 seconds, the specimen
travels faster.
b. To fully advance/rewind the head press and
hold the switch.
c. To move small rewind increments, quickly
press the switch in the intended direction.
2.2.6 FOOT SWITCH
The Foot switch is only available on High Spec
models and is used to control the Motor drive.
The Motor drive has two different modes of
operation they are; single cut and continuous
cutting mode, the mode being selected
through on the touchscreen. On single cut
mode, pressing the foot switch commences a
single cut. While on continuous cutting mode,
a press of the foot switch commences cutting
then a secondary press stops the cutting.
2. Operation Instructions
Cont.
