Briel motormaher Brielmaier, Operating Manual

Page: 27 / 32

25
• Unscrew the oil locking plug and take it away.
Drain used oil completely and dispose of
correctly. Incline the mower backwards to
enable the oil to flow out.
Drain plug
• First unscrew the lid of the oil filter housing to
change the oil filter. Then remove the old filter
cartridge and put in the new one
• Put up the yoke at the oil filter and pay attention
that the yoke is moved between the „lugs“ of
the inner side of the lid
• Screw in drain plugs
• Fill in oil
• Start motor, then test all functions (driving,
steering, engage mowing machinery). Finally,
check again the oil level and fill up if necessary
If you are not going to use the motor for a
prolonged period (longer than a month), please
take the following measures:
• Wipe off dirt and oil on external parts
• Clean air filter cartridge
• Change motor oil inside crankcase
• Drain gasoline from the gas tank, from the gas
filter pan and carburetor float chamber
• Take out the sparking plug, fill oil 5 to 10 ccm,
turn the crankshaft of the starter several times
and then re-install the sparking plug
• Pull the starter softly until you reach the point
of maximum resistance (compression point)
• Cover the machine with a tarpaulin and park
it in a dry, dust-free and cool place
Airfilter
• If the air filter is dirty or clogged it may have a
negative impact on the service life of the motor
• Therefore clean the filter every 50 hours or
more often, if the environment is very dusty
• Replace cartridge after 6 cleanings or after a
year at the latest
Change of hydraulic oil and oil filter
Standstill for a prolonged period