Briel motormaher Brielmaier, Operating Manual

Page: 11 / 32

9
The most important operating elements
1
2
3
4
5
6 7
8
9 10
11 12 13
14 15
16 17 18 19
20
21 22
16. Switch for ignition and electro start
17. Light-emitting diode indicating ignition ON
0 = OFF
= light-emitting
diode indicates
ignition ON
Start = igniting the
mower
18. Rotary potentiometer with fine adjustment for
pre-selecting of driving speed from 0 to max.
(infinitely variable) (see also page 9)
19. Switch for driving direction: FORWARD –
REVERSE
20.Light-emitting diode display „FORWARD“
The basic setting after starting
is “FORWARD” and light-
emitting diode 20 indicates
this.
Press the push-button 19 once
to set to reverse mode. Light-
emitting diode 20 goes off.
Press the button again and
forward mode is re-set.
Right hand
21. Accelerator
22. Turnable control bar
Center position: straight forward movement.
If you turn the steering bar to the right/to the
left the mower moves simultaneously to the
right and respectively to the left and at the
same time the corresponding mower’s wheel
is retarded. Same procedure for reversing (no
operating adaptation strategy necessary). If
the control bar is rotated until abutment (see
diagram) the retarded wheel turns backwards.
Thus, turning on the spot is enabled. This
function is only available for speed 1 and 2.
It is less efficient in speed 2.
At the motor
23. Choke with three adjusting possibilities: cold
start, warm up phase and continuous operation
16
17
23
Center position: straight forward movement
Left wheel stationary Right wheel stationary
Left wheel
rotates backwards
Right wheel
rotates backwards