9
8.
Blending cycle
.
WARNING: The lid and stopper/measure must be fitted before
blending
. You can only blend the soup once the timer has elapsed and the heating
cycle has finished. To end the heating cycle early, use the decrease timer button
to set the timer to
00
. If your soup maker is in the keep warm mode, press the on/
off button to exit keep warm mode. Press the on/off button again to enter standby
mode then blend your soup or sauce by setting the blending control to the
1
or
2
position. You can also use the
Pulse
position. For your safety, settings
3
and
4
are
not available when processing ingredients over 70°C.
9. After blending, remove the jug from the base unit by rotating the jug until the
unlocked ( ) icon on the collar lines up with the triangle symbol ( ) on the base
unit. Lift the jug off the base unit.
The jug, collar, heating plate and the heating
element in the base unit will be HOT—handle with care!
NOTES
When sautéing, pressing the STIR button can cause ingredients that are too chunky to
become jammed. If this happens, wait until the ingredients have softened before using
the STIR function again.
During cooking, the heater will switch on and off to maintain temperature. The bubbles
formed during cooking may increase and decrease when this happens.
For chunky soup, blend using the STIR button to pulse the ingredients until the desired
consistency has been obtained.
Ingredients can be added to the jug during cooking by removing the stopper/measure.
However, we do not recommend removing the stopper/measure when your soup maker
is on the HIGH setting.
Always handle with care and beware of escaping steam from
this area during use
.
