19
PAge heAder.....
HINTS & TIpS
pOSSIBLE pROBLEm
EASy SOLUTION
motor doesn’t start or
blade doesn’t rotate
•
Check that the blender jug is securely locked into position.
•
Check that the blade assembly is correctly attached to the
base of the blender jug.
•
Check that the POWER button and selected function or
speed setting is illuminated.
•
Check that the power plug is securely inserted into the
power outlet and switched on.
food is unevenly
chopped
•
Either too much food is being blended at one time or the
pieces are too large.
•
Try cutting food into smaller pieces of even size and
processing a smaller amount per batch.
•
For best results, the food should be chopped into pieces no
larger than 2cm.
food is chopped too
fine or is watery
•
The food is over processed. Try using the Ice/Auto Pulse
function or process for a shorter time.
food sticks to blades
and jug
•
The mixture may be too thick. Try adding more liquid to
the mixture and/or use another function
Overload Blender
•
The motor is protected from burning out by an automatic,
temperature operated, cut-out switch.
•
If the blender is overloaded or operated continuously
for too long, the motor may overheat. If this happens, the
buttons will start to flash and the safety cut-out switch will
prevent the blender from operating. To operate the blender
again, you must switch off at the power outlet, unplug
and allow to cool for approximately 30 minutes. Once the
motor has fully cooled, it is ready for use again.
TROUBLESHOOTING GUIdE
Summary of Contents for the Kinetix BBL550EX
