Breville The Dynamic Duo BEP920, Instruction Booklet

Page: 10 / 25

18 19
SETTING UP YOUR BREVILLE PRODUCT
THE SMART GRINDER™ PRO
GRINDER OVERVIEW
Your Smart Grinder™ Pro uses Hardened
Stainless Steel Conical Burrs and is able to
grind whole bean coffee suitable for a range of
Brewing Methods, from the finest setting for
Espresso to the coarsest setting for Plunger.
You are able to select the amount of Shots or
Cups with a single button. The Grind Amount
(dose) for all coffee types is controlled by a
digital timer. The default dose for each Brew
Method is able to be adjusted by simply
turning the Grind Amount dial and changing
the time the grinder will run. Once you have
your desired dose, you can press and hold the
PROGRAM button to set your custom time.
You can grind directly into a Portafilter, Grinds
Container or Drip Coffee filter basket.
BEFORE FIRST USE
Before first use, remove & safely discard
all promotional labels & packing materials
attached to your Breville product. Wash
hopper, cradles, grind container, container
lid & cleaning brush in warm soapy water &
dry thoroughly. Wipe exterior of grinder with
a soft damp cloth & dry thoroughly. Place
grinder on flat level surface & plug power cord
into 230–240V outlet and switch Power ‘ON’.
ENERGY SAVING FEATURE
The grinder will automatically switch off
if not used after 5 minutes.
To reactivate the machine whilst in
POWER SAVING/SLEEP MODE, press
any button on the grinder control panel.
NOTE
If bean hopper has not been locked into
position, ‘PLEASE LOCK HOPPER’
message will be displayed on the LCD
screen disabling the operation of the
grinder for safety.
ASSEMBLY
Bean Hopper
Align tabs on the base of the bean hopper
and insert hopper into position. Turn the bean
hopper dial 90° to lock into position.
Fill with fresh coffee beans and secure lid on
top of bean hopper.
The bean hopper can be removed by turning
dial anti clockwise and lifting hopper to pull
out. The locking system allows you to remove
and transfer beans in the hopper to a storage
container safely.
Cradle
Insert cradle into the grinder.
OPERATING YOUR BREVILLE PRODUCT
MAKING ESPRESSO
Heating your cup or glass
A warm cup will help maintain the coffee’s
optimal temperature. Pre-heat your cup by
rinsing with hot water from the Hot Water
outlet and place on the cup warming tray.
Heating the portafilter and filter basket
A cold portafilter and filter basket can
reduce the extraction temperature enough to
significantly affect the quality of your espresso.
Always ensure the portafilter and filter basket
are pre-heated with hot water from the Hot
Water outlet before initial use.
NOTE
Always wipe the filter basket dry before
dosing with ground coffee as moisture
can encourage channelling where
water bypasses the ground coffee
during extraction.
Grinding for Espresso Coffee
Use the finer 1–30 settings in the ESPRESSO
range.
STEP 1:
Insert your portafilter into the cradle.
PUSH
NOTE
You can change the amount already
selected during operation by pressing the
SHOTS|CUPS button. Maximum number
of shots with the cradle inserted is 2.
STEP 2:
Selecting your SHOTS|CUPS
Select the desired amount of ground coffee
required by pressing the SHOTS|CUPS button.
START PAUSE GRIND AMOUNT SHOTS CUPS
CANCEL PROGRAM
Continue pressing the SHOTS|CUPS button
until desired amount is displayed.
The maximum number of shots or cups for
each Brew Method is shown in the Coffee
Chart below. The amount dispensed will vary
depending on the Brew Method selected and
the Grind Amount.