30
31
PAGE HEADER.....
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
Steam Temperature (StEA)
Adjust Steam Temperature to control the
pressure of the steam being delivered. Lower
steam temperature to texture smaller volumes
of milk or have more control. Raise steam
temperature to texture larger volumes of milk.
Press MENU to Select STEAM.
Use UP and DOWN arrows to select required
steam temperature.
Press MENU to set.
Machine will beep once to confirm selection.
Machine Audio (Snd)
Machine Audio refers to the volume level
of the ‘beeps’ heard.
•
HI - high volume
•
LO - low volume
•
OFF - volume off
Press the MENU button to select Audio.
Press UP or DOWN arrows to select
desired volume. Press MENU to set. Machine
will beep once to confirm selection.
Volumetric Control (vOL)
Use this function to set Duration or Volume to
control the espresso output.
Press the MENU button to select. Use the UP
or DOWN arrows to select FLo or SEc. Press
MENU to set. Machine will beep once to
confirm selection.
ADJUSTING PRE-INFUSION
Pre-Infusion Programming
With machine in STANDBY mode, press
UP and DOWN arrows together to enter
Pre-Infusion programming mode.
Press MENU button to move between
Pre-infusion Duration and Power.
Pre-Infusion Duration
The LCD will display the current
Pre-Infusion Duration.
Press UP or DOWN arrow to vary time.
We recommend a range of between
5 - 15secs as being optimum.
Pre-Infusion Power
The LCD will display current
Pre-Infusion Power.
Press UP or DOWN arrows to vary power.
We recommend a range of between 55–65
as being optimum. Press EXIT to confirm
setting and return to STANDBY mode.
ALERTS
STEAM LED Flashing At START UP
The machine will not enter START UP mode
when the STEAM LEVER is in the OPEN
position and the STEAM LED is flashing.
Move the STEAM LEVER to the CLOSED
position for the machine to enter START UP
mode.
OPERATING YOUR BREVILLE PRODUCT
HOT WATER LED Flashing At START UP
The machine will not enter START UP mode
when the HOT WATER dial is in the OPEN
position and the HOT WATER LED is flashing.
Move the HOT WATER dial to the CLOSED
position for the machine to enter START UP
mode.
HOT WATER LED Flashing
The HOT WATER LED will flash when the
HOT WATER function has been operating for
longer than 1 minute. Move the HOT WATER
dial to CLOSED position for machine to enter
STANDBY mode.
FILL TANK
The machine will detect a low water level. The
FILL TANK icon will be displayed on the LCD
screen.
If FILL TANK icon is displayed, add water
to tank until machine returns to STANDBY
mode.
CLEAN ME!
The machine will detect when 200 extractions
have been carried out since the last clean cycle.
The CLEAN ME! icon will be displayed on the
LCD screen the next time the machine enters
START UP mode.
Summary of Contents for The Dynamic Duo BEP920
Page 25: ...48 49 PAGE HEADER NOTES NOTES...