Breville Kinetix Aero BBL420, Instruction Booklet

Page: 6 / 32

5
BREvILLE RECOMMENdS SAFETy FIRST
5
removing the lid from the blender jug.
The blender jug should then be removed
from the motor body and the food
carefully removed before attempting to
remove the blade assembly.
• Do not operate the blender continuously
for periods longer than 2 minutes on
any setting. None of the recipes in this
book are considered a heavy load. If the
blender is operated continuously for too
long, it should be allowed to rest for 25-
30 minutes before recommencing.
• Allow the motor to rest for 1 minute
between each use.
• Do not operate the appliance
continuously with heavy loads for more
than 10 seconds.
• Do not process hot or boiling liquids –
allow liquids to cool before placing into
the blender jug.
• Do not move the blender whilst
in operation.
• Do not leave the blender unattended
when in use.
• Do not place any part of the blender in
the dishwasher or microwave oven.
• Do not place anything on top of the
blender jug when the lid is on, when in
use and when stored.
• Keep the blender clean. Follow the
cleaning instructions provided in
this book.
• Always turn the power off at the power
outlet and then remove the power
plug from the power outlet before
attempting to move the appliance, when
the appliance is not in use and before
cleaning or storing.
MOTOR OvERLOAd
PROTECTION
• Your blender is equipped with overload
protection.
• If your blender is overloaded the motor
will stop and the “overload protection”
light will flash, next to the ice crush
button.
• Please do not attempt to use the blender
while the “overload protection” light is
flashing.
• Once the warning light stops flashing
(this could take up to 30 minutes) the
blender has cooled sufficiently and is
ready to use again. Reselect the desired
speed or function. If you have turned
the blender off you will need to switch
it back on, wait for the flashing light to
stop then reselect the desired speed or
function.
• We recommend removing a portion of
the mixture, cutting food into smaller
pieces of even sizing and / or processing
a smaller amount per batch.
SAvE THESE
INSTRUCTIONS