Breville Kinetix Aero BBL420, Instruction Booklet

Page: 5 / 32

4
BREvILLE RECOMMENdS SAFETy FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
REAd ALL INSTRUCTIONS
BEFORE USE ANd SAvE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating the Breville Blender for the
first time and save for future reference.
• Remove and safely discard any
packaging material and promotional
labels before using the blender for the
first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
• Do not place the blender near the edge
of a bench or table during operation.
Ensure the surface is level, clean and
free of water and other substances.
Vibration during operation may cause
the appliance to move.
• Do not use the blender on a sink
drain board.
• Do not place the blender on or near a hot
gas or electric burner, or where it could
touch a heated oven.
• Handle the blender and attachments
with care – remember the blades are
razor-sharp and should be kept out of
the reach of children.
• Care shall be taken when handling the
sharp cutting blades, emptying the bowl
and during cleaning.
• Always ensure the blender is
completely assembled before operating.
The blender will not operate unless
properly assembled.
• Do not use attachments other than those
provided with the blender.
• Do not attempt to operate the blender by
any method other than those described
in this booklet.
• Always secure the blade assembly onto
the blender jug before attaching to the
motor base.
• Ensure the Variable Speed dial is in
the OFF position and the blender is
switched off at the power outlet and
the power cord is unplugged before
attaching the blender jug.
• Always operate the blender with the
blender jug lid in position.
• Keep fingers, hands, knives and other
utensils away from moving blades.
• Do not place hands or fingers into the
blender jug unless the motor and blades
have come to a complete stop. Ensure
the Variable Speed dial is in the OFF
position and the appliance is switched
off at the power outlet and the power
cord is unplugged before removing the
lid from the blender.
• Ensure the motor and the blades
have completely stopped before
disassembling. Ensure the Variable
Speed Dial is in the OFF position and
the appliance is switched off at the
power outlet and the power cord is
unplugged from the power outlet before
attempting to move the blender, when
not in use, if left unattended and before
disassembling, cleaning or storing.
• Care should be taken when removing
the food from the blender jug by
ensuring the motor and the blades
have completely stopped before
disassembling. Ensure the Variable
Speed Dial is turned to the OFF
position, the appliance is switched off at
the power outlet and unplugged, before
IMPORTANT SAFEGUARdS