![background image](http://html1.mh-extra.com/html/breville/bbm100/bbm100_instruction-book_2808857007.webp)
7
THE CONTROL PANEL
The Control Panel is designed to perform
several functions and is activated by switching
the bread machine on at the power outlet. The
LED Screen indicates the setting and crust
colour selection then the completion time for
the setting. The various buttons are used to
set the functions and to start or stop the bread
machine. The buttons should be pressed firmly.
A soft beep sound is made as each button is
pressed.
LED SCREEN
The LED Screen shows firstly a setting (1 –9)
and crust colour (P, H or L) selected, then
automatically changes to show the total time
for the setting. When the START/STOP
button is pressed to commence operation, the
time displayed (in hours and minutes) is the
time remaining until the selected setting is
completed.
MENU
Press this button to select one of the 9
automatic settings available. These settings are
listed on the next page. Each time the MENU
button is pressed, the setting is changed and
a red light illuminates alongside the setting
selected. The setting selected is also shown on
the LED Screen between 1 to 9.
CRUST
Press the CRUST button to select the 3 crust
colours available for the bread settings only.
The colour selected is show on the LED Screen
as a letter P, H or L.
P = MEDIUM crust colour
H = DARK crust colour
L = LIGHT crust colour
PRESET TIMER
Use the PRESET TIMER to delay the start of
the selected program. Press the
s
or
t
buttons
(which will move time up or down in 10 minute
increments) to preset the timer (refer page 11).
START/STOP
The oven features a combined START/STOP
button.
To START: Press the START/STOP button
to commence the selected program or begin
timer countdown for the PRESET TIMER.
To STOP: To stop and cancel the program
in the mid-cycle the START/STOP button
must be pressed down and held for approx.
2 seconds until the beep sounds and the LED
Screen is reset. DO NOT PRESS THE START/
STOP BUTTON when checking the bread
as this will cancel the program. The machine
will not continue to operate, in the selected
program.
POWER INTERRUPTION PROTECTION
The Breville Baker’s Oven has an in-built
Power Interruption Protection system. If the
power is interrupted for 5 minutes or less
(by a power failure or accidentally switching
off at the power outlet), the program will be
automatically resumed when the power is
restored.
Functions