3
• Always ensure the appliance
is properly assembled before
use. Follow the instructions
provided in this book.
• The AquaStation™ Chilled
must be used only with the
Breville filter supplied or
replacement product code
LWA063.
• This appliance has been
designed specifically for the
purpose of filtering and chilling
drinking quality water only.
Under no circumstances should
this appliance be used to chill
any other liquids.
• Do not place the appliance
near the edge of a bench or
table during operation. Ensure
that the surface is level, clean
and free of water and other
substances.
• Do not operate the appliance
on a sink drain board.
• Do not operate the appliance in
an enclosed space, or within a
cupboard.
• Never immerse the appliance,
power cord or power plug in
water, or allow moisture to
come into contact with these
parts.
• Do not move the appliance
while it is switched on.
• Always ensure the appliance
returns to standby mode, then
turn the power off at the power
outlet and remove the power
plug from the power outlet
before attempting to move the
appliance, when the appliance
is not in use and before
cleaning and storing.
• Do not remove the water tank
from the power base during
operation.
• If the water tank is removed
from the power base during
water dispensing, the appliance
will automatically stop.
• Always fill the water tank with
water between the minimum
(MIN) and maximum (MAX) as
marked on the water tank.
• Too little water will result in the
appliance not operating and
Water Droplet will turn solid
red. Filling above the maximum
mark (MAX) may result in
water splashing from the water
tank.
• Ensure the water level is
always above the MIN level for
optimum dispensing flow rate.
• The lid should always be
correctly fitted on the water
tank except when refilling.
• Do not place the appliance
in direct sunlight. Colour
fading and discolouration may
occur when the appliance is
consistently exposed to sunlight