14
NOTE
When preparing the Activ360™ filter for the
first time use of your AquaStation™, there is no
need to action step 8 for filter reset; once the
filter is installed, the unit will automatically
begin the filter life counter.
IMPORTANT
•
A dirty filter may reduce the performance of
the unit.
•
The filter is not washable.
•
Use only the original Breville filter
specifically intended for use with the
AquaStation water machines.
•
Filter replacement alert is set to 90 days or
approximately 200L of water, whichever
comes first, however, for higher-than-normal
consumption or poor water quality, more
frequent changing may be required. If you
need to change your filter before the filter
replacement alert activates at 90 days or
approximately 200L.
NOTE
To exit FILTER RESET without resetting the
filter, turn the dial to other temperature setting.
•
Press and hold the START/STOP button for
3 seconds, The START/STOP button light
will flash continuously in red and "FILTER
RESET" light illuminate, press the START/
STOP button once to reset the filter time once
you have changed the filter cartridge.
•
Water quality varies considerably from one
area to the next and has an effect on the life
of the water filter cartridge. For optimum
performance, the filter change alert will
activate after 90 days.
NOTE
•
No filter or an incorrectly fitted filter may
cause the unit to operate less effectively and/
or may cause damage to the unit.
•
The filter must be fitted in the filter holder
with the pull ring facing upwards.
•
From time to time, small floating black
particles may escape from the filter into the
water. This is a natural carbon fibre which is
food grade safe and not harmful to health.
NOTE
For replacement water filters, visit Breville.com
or contact Breville Customer Service.
