13
3x
MAX
MIN
MAX
MIN
2L
2L
10m
SHAKE FILTER
2L
AMBIENT
MAX
MIN
MAX
MIN
FUNCTION
AMBIENT
NEW FILTER
2L
90d
FILTER RESET
1. Lift the water tank from the unit, remove the
lid and set aside. Lifting by the ring, remove
the filter cartridge from the filter holder and
discard any remaining water inside the water
tank.
10m
1L
90d
FILTER RESET
SHAKE FILTER
FILTER RESET
FUNCTION
MAX
MIN
MAX
MIN
NEW FILTER
2. Remove the new filter cartridge from its
packaging.
NOTE
It is normal for the filter to appear moist when
removed from its wrapping. This is
condensation from the hygienic steam
sterilisation process.
10m
1L
90d
FILTER RESET
SHAKE FILTER
FILTER RESET
FUNCTION
MAX
MIN
MAX
MIN
NEW FILTER
3. Immerse the filter in a bowl of tap water and
gently shake until there are no air bubbles.
Soak filter in the tap water for 10 minutes.
3x
MAX
MIN
MAX
MIN
2L
2L
10m
SHAKE FILTER
2L
AMBIENT
MAX
MIN
MAX
MIN
FUNCTION
AMBIENT
NEW FILTER
2L
90d
FILTER RESET
4. Once soaked, insert the filter into the filter
holder and push down firmly to secure in
place.
NOTE
Make sure the filter is tightly fitted.
3x
MAX
MIN
MAX
MIN
2L
2L
10m
SHAKE FILTER
2L
AMBIENT
MAX
MIN
MAX
MIN
FUNCTION
AMBIENT
NEW FILTER
2L
90d
FILTER RESET
5. To flush and activate the new filter cartridge,
add 2L of water to the water tank and return
to the unit. Place a 2L empty container under
the spout. Turn the FUNCTION dial until
the indicator reaches AMBIENT, then press
the FUNCTION dial once to select. Press
START/STOP again to start dispensing water
into the container.
3x
MAX
MIN
MAX
MIN
2L
2L
10m
SHAKE FILTER
2L
AMBIENT
MAX
MIN
MAX
MIN
FUNCTION
AMBIENT
NEW FILTER
2L
90d
FILTER RESET
6. Fill the container to full, then discard the
collected water.
3x
MAX
MIN
MAX
MIN
2L
2L
10m
SHAKE FILTER
2L
AMBIENT
MAX
MIN
MAX
MIN
FUNCTION
AMBIENT
NEW FILTER
2L
90d
FILTER RESET
7. Once flushed, fill the water tank with tap
water up to the MAX line and return the tank
to the unit.
3x
MAX
MIN
MAX
MIN
2L
2L
10m
SHAKE FILTER
2L
AMBIENT
AMBIENT
5ºC
10ºC
15ºC
FILTER
RESET
NEW FILTER
2L
90d
3x
MAX
MIN
MAX
MIN
8. Turn the FUNCTION dial until the indicator
reaches FILTER RESET, then press the
FUNCTION dial once to reset the filter
counter. The START/STOP button light will
stop flashing and FILTER RESET light will
turn off.
9. The unit is now ready to use
