15
Operation
OPERATING YOUR
AQUASTATION CHILLED
1. Ensure the water tank is in place and that
the water filter cartridge is correctly fitted
into position.
2. Plug into a 230/240V power outlet. The
unit will sound a long beep and the water
droplet light will flash 3 times to indicate
the unit is in standby mode.
3. Remove the water tank and fill with cold tap
water to the MAX level. Never fill past the
MAX level.
4. Ensure the water tank is assembled to the
unit correctly and place a cup of choice onto
the drip tray, or alternatively, remove the
drip tray to accommodate large glasses.
NOTE
Always ensure the water tank is filled to the
MAX level for optimum flow of water from
the spout. Ensure the water tank is filled above
MIN water level, or as soon as the water droplet
light on the START/STOP button will turn to
solid red.
If the water level falls below the MIN tank
marking, the water sensor will automatically
stop dispensing and The water droplet light on
the START/STOP button will illuminate solid
red.
Regularly check and discard any water that
might accumulate in the drip tray.
TURNING OFF THE Unit
Turn off at the power outlet.
IMPORTANT
Turning the unit off at the power outlet will
delete the 'last setting' memory function.
NOTE
Discard any filtered water that has been left
sitting for several days or more. This will
ensure you have cleaner, great-tasting water.
If your filter has been unused for a long period
of time, it is recommended to resoak the filter
for 10 minutes before use and clean the water
tanks as per the cleaning instructions found in
this book.
WARNING
To prevent damage to the compressor and to
ensure maximum performance, place unit in an
upright position for 12 hours after transit.
STANDBY MODE
When the unit is plugged into the power outlet,
the unit will sound a long beep and the water
droplet light will flash 3 times to indicate the
unit is ready for use.
The unit will automatically enter energy saving
standby mode after 5 minutes if not used.
The control panel indicator lights will turn
off except for
and READY to indicate the
compressor is still working.
To awaken the unit, press the START/STOP
button once; one long beep will sound, the
water droplet light will illuminate white and
flash rapidly 3 times to indicate that the unit is
ready to use.
Ambient Water in Operation
1. Turn the FUNCTION dial to AMBIENT,
press the START/STOP button to instantly
dispense filtered ambient water. Press
START/STOP button once more to stop
dispensing water. The water droplet
will illuminate solid white during water
dispensing.