17
Care, Cleaning &
Storage
CAUTION
To prevent damage to the appliance, do not
use alkaline or abrasive cleaning agents, steel
wool or scouring pads as these can damage the
surface of the unit. Do not place any part of this
appliance in the dishwasher.
CLEANING THE AQUASTATION
1. Remove the plug from the power outlet
before cleaning.
2. Discard any water in the water tank, then
remove the filter cartridge from the filter
holder.
3. Wipe the water tanks with a clean, damp,
lint-free cloth. The filter is not washable.
CLEANING THE OUTER HOUSING
•
Wipe with a soft, damp cloth followed by a
soft, dry cloth to polish.
•
Alternatively, purchase a stainless steel
cleaner such as Breville's Stainless Steel
Cleaner & Polish and follow directions.
•
Do not use abrasive cleansers, pads or cloths
which can scratch the surface.
NOTE
For Breville's Stainless Steel Cleaner & Polish,
visit Breville.com or contact Breville Customer
Service.
CLEANING THE WATER SPOUT
Residue build-up or foreign substances, such
as dust or lint, may accumulate in the water
outlet. Clean the spout periodically using a soft
brush (not included).
EMPTYING THE INTERNAL 2L
CHILLING CHAMBER
1. To completely empty the internal 2L
chilling chamber before storing, turn off and
unplug the unit from the power outlet.
2. Remove and empty the removable external
6L water tank.
3. Place the unit on sink drain board ensuring
the power cord & power plug are not
immersed in any water, unscrew the plastic
drain plug cap (refer to figure a) located
underneath the unit, then pull out the
rubber plug (refer to figure b), allow water to
drain from the internal 2L chilling chamber.
4. Replace the rubber plug (refer to figure c)
and screw the plastic drain plug cap back
on (refer to figure d).
5. Wipe the water the base of the unit with a
clean, dry, lint-free cloth.
