4
brentwheels.com
IMPORTANT
SAFETY INSTRUCTIONS
DO READ AND SAVE THESE INSTRUCTIONS
NOTE: It is not safe to operate
electrical equipment around
water if it is not grounded.
DO AND
DO NOT
DO NOT leave wheel running unattended.
DO NOT force the wheel head to stop, as
this will shorten the life of the motor.
DO NOT plug power cord into an
extension cord.
DO plug power cord directly into electrical
wall outlet.
DO NOT exceed recommended maximum
clay weight for your wheel, to do so will
shorten the life of the motor.
DO fully depress foot pedal backwards
into the “OFF” position before turning
the wheel on.
DO NOT attempt to move or hold the wheel
during operation, or while the power is on as
this could cause serious injury.
DO when cleaning the wheel, inspecting
parts, and between periods of use, always
turn off the on/off switch and confirm that
the power indicator light is off. Then unplug
the wheel from its power source.
DO take care with long hair, jewelry, and
loose fitting clothing. Such items may get
caught in the moving wheel head causing
damage or injury.
DO plug the wheel into a grounded
(3-prong) 110-120 or 220-240 volt AC
outlet, depending on your wheel’s power
configuration.
DO use an adaptor if you do not have
grounded outlets available. DO make
certain you connect the green wire from the
adaptor to a suitable ground.
DO NOT let the wheel stand in water.
DO keep tools and small parts out of reach of
small children.
DO place the wheel on a flat, even surface
away from other objects.
DO NOT ever operate the wheel with the
belt guard removed.
DO NOT attempt to lift the wheel by yourself.
Equipment must be lifted by two to three
people, depending upon your wheel model.
DO when conducting a repair, disconnect
power supply by unplugging power cord
from outlet.
DO have the power outlet in the vicinity of
the wheel and under immediate supervision
of service personnel at all times.
DO stop operation of the wheel if you
see or smell smoke, or if you hear unusual
noises. Then turn off power, unplug power
cord from outlet, and call brent® Repair for
assistance.
DO NOT remove the control box and panel
covers when the wheel is plugged into
power. Doing so makes the internal parts
vulnerable to damage.
DO NOT attempt repairs and modifications
yourself. To do so will void your warranty.
DO call a qualified technician for repairs or
modification. Should you need clarification
or help troubleshooting before calling a
technician, call AMACO/brent first at 800-
999-5456 for help and technical support.