13
800-999-5456
MAINTENANCE: WHEEL
MOTOR BRUSH REPLACEMENT
1. Carefully remove the brush cover using a
standard flat-blade screwdriver or washer.
3. Gently pull the brush out of the holder.
Note orientation of brush to ensure you can
replace in same way if brush will be re-used.
5. Use brush cover to compress brush spring.
The two tabs of the brush must be aligned
properly in the holder.
CURRENT
ELECTRIC
MOTORS
2. Once the cap is removed, the brush spring
will be visible.
4. For installation, insert the brush into the
holder.
6. Use your fingers or a screwdriver to thread
brush cover into holder. Be careful not to
strip plastic threads. DO NOT OVER TIGHTEN.
Motor brushes should be replaced every 5000
hours of operation. This equates to a standard
use of 4 hours per day, 5 days per week for
5 years. Please contact AMACO/brent FIRST
when your brushes need replacing. Please email
technicalsupport@amaco with a photo of your
old brush, the serial number of your wheel and
make of motor so the technician may help you
choose the correct brushes for your wheel.
Your replacement brush may come from
AMACO/brent or your local distributor.
CAUTION: UNPLUG THE POWER
BEFORE ATTEMPTING MOTOR SERVICE!