33
Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet.
Referring to Fig. 5B, insert 5/16” Hex head bolts from
hardware package #2, from the outside of the frame, through
Hole #3
. Thread on 5/16” Nylock nuts from hardware package
#2,
only finger tight
at this time. Repeat for opposite side.
STEP 3
Referring to Fig. 5B, insert 20mm Allen head bolts from
Hardware Package #2, from the outside of the frame, through
Hole #1
on the side of the bed frame. Thread on 5/16” Nylock
nuts from hardware package #2 and securely tighten with a
1/2” socket. Repeat for opposite side. These Allen head bolts
will be used as a positioning guide.
STEP 2
The bolts for Holes #1, #2 and #3 will all attach from the outside of the
frame. In other words, the bolt heads will be on the outside of the frame and
the nuts will go on the inside of the frame for all three of the holes.
FIG. 5B - BED FACE PANEL, LEFT SIDE VIEW OF MECHANISM END
For video instructions of this specific chapter, visit:
breda.us/face
Note: Hole #2 will be used on the next step.
