background image

 8

PC3060 Price Computing Scale User Instructions

1.5 Cleaning the machine

1.6 Training

Do not attempt to operate or complete any procedure on a machine unless you have 
received the appropriate training or read the instruction books.

To avoid the risk of RSI (Repetitive Strain Injury), place the machine on a surface which 
is ergonomically satisfactory to the user. Take frequent breaks during prolonged usage.

1.7 Sharp objects

Do not use sharp objects such as screwdrivers or long fingernails to operate the keys.

1.8 FCC and EMC declarations of compliance

United States

Canada

Table 1.1  Cleaning DOs and DON’Ts

DO

DO NOT

Wipe down the outside of standard products 
with a clean cloth, moistened with water and 
a small amount of mild detergent

Attempt to clean the inside of the machine
Use harsh abrasives, solvents, scouring cleaners or 
alkaline cleaning solutions

Spray the cloth when using a proprietary 
cleaning fluid

Spray any liquid directly on to the display windows

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own 
expense.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio 
Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de 
la Classe A prescrites dans le Règlement sur le brouillage radioélectrique edicté par le ministère des Communications du Canada.

Summary of Contents for PC3060































Reviews: