Brecknell PC3060, User Instructions

Page: 16 / 30

16 PC3060 Price Computing Scale User Instructions
4 Operation
4.1 Initial startup
To get the best performance from your PC3060, please allow a warm-up time of around
15 minutes to help stabilize the measured values after switching on.
4.1.1 Power ON/OFF
Power switch is located under the scale on the right-hand side. To switch on the scale,
press and hold the on/off switch until the scale Beeps. The scale will turn on and the
display will run through self-test screens before showing zero.
To switch off scale press the on/off switch again.
4.1.2 Zero
If the weight display does not return to zero with no weight on the scale, the display can
easily be re-zeroed by pressing the
ZERO key.
4.1.3 Tare
When weighing produce on a tray, film or, container, the weight of any container can
easily be tared off, so you only see the Net weight of the produce being weighed.
1. Place the empty container to be tared off on the weighing pan and press the
TARE key.
The display will tare off this weight and show a Net Zero weight on the
display with the
NET annunciator illuminated.
2. To clear a tare weight, remove all weight from the weighing pan and press the
TARE key again. The display will return to Gross Zero and the NET
annunciator will turn off.
4.1.4 Sample weighing
1. Place goods to be weighed on the weighing pan. Wait a few seconds for the
display to stabilize.
2. Read the result.
To avoid overloading, when ol appears, reduce the load or unload the weight from the
scale.