84 Cleaning the Vivo 40 and Replacement of Accessories
Vivo 40 clinician’s manual
Doc. 003886 En-Us A-1e
HA 01 Humidifier
The HA 01 humidifier should be cleaned, maintained and replaced in
accordance with the manufacturer’s instructions.
Patient Circuit
Always replace the patient circuit with a new one when the Vivo 40 is to be used
by a new patient.
3
At regular cleaning after normal
use, keep the rear lid or
HA 01 humidifier attached.
In case a more thorough cleaning is
needed, detach the rear lid or the
HA 01 humidifier.
4
Disconnect all electric cables.
5
Clean the outside of the Vivo 40
using a lint-free cloth and a mild
soap solution. If the surface of the
Vivo 40 needs to be disinfected, this
can be done with Virkon
®
or Gigas-
ept
®
.
6
Reconnect the patient cir-
cuit. Make sure all parts are dry
before the Vivo 40 is put into
operation.
For more information, see Breas HA 01 Humidifier User Manual.
The patient circuit should always be cleaned, disinfected and replaced in accordance
with the applicable manufacturer’s instructions.
