35
Using the Vivo 40
Vivo 40 clinician’s manual
Doc. 003886 En-Us A-1e
5
Using the Vivo 40
5.1 Set up the Vivo 40 Before Use
Always do the following before using the Vivo 40:
1
Connect a cleaned or new patient circuit to the Vivo 40.
2
Connect the Vivo 40 to the AC power source.
3
Switch on the Vivo 40 main power using the On/Off switch on the side
panel.
4
Press the Start/Stop button on the front panel. Check that a short sound
signal is heard. If there is no signal, do not use the Vivo 40 and contact your
service provider.
5
Ensure that the settings are adjusted as prescribed.
The Vivo 40 is ready for use.
