53
Preparing the Vivo 40 for Use
Vivo 40 clinician’s manual
Doc. 003886 En-Us A-1e
6
Preparing the Vivo 40 for Use
6.1 Installing the Vivo 40
When using the Vivo 40 for the first time, follow the instructions below:
Read the chapter “Safety Information” on page 8 before setting up and
using the Vivo 40.
1
Check that all main compo-
nents and ordered accessories
have been delivered (refer to
the packing note or the invoice,
if available).
2
Ensure that the equipment
is in good condition.
3
If stored more than 1 month, connect the Vivo 40 to the AC power supply
and switch on the On/Off switch to recharge the internal battery and the
alarm battery in standby mode.
4
Check that the air filters are
installed.
