BRAVE SlimDP
–
User and service manual 27
Parameter Value
Meaning
Basic
32
rp hh...
In regime
Day + Night
password
hh...
for
relay
r,
in order p=1-5 for 1 impulse and
p=* for 2 impulses (11-444444)
-
33
rp hh...
In regime
Day
password
hh...
for relay
r,
in order p=1-5 for 1 impulse and p=* for 2
impulses (11-444444)
-
34
rp hh...
In regime
Night
password
hh...
for relay
r,
in order p=1-5 for 1 impulse and p=* for 2
impulses (11-444444)
-
r
– relay number [relay number [1 in SlimDP]
p
– order [1 - 5] for 1 impulse. 5 passwords (external codes) from Brave‟s
buttons (external code of code lock)
p
– order = * to set password (external code) for 2 impulses
hh...
– password (external code) for relay switching on from button or
keyboard [2 to 6 places]. Buttons 1 - 4 are programmed as numbers
1-4.
All together 3x12 passwords, depending on the Day/Night setting,
combinations are be input either with the help of the buttons (only butons on
panel
– max. 4). Switching on a relay is affected by the relay
regime
and the
choice
Day/Night
, if the regime
2 groups of numbers
is set, the system is
constantly in regime
DAY
.
There are several rules that needs to be followed when setting a password:
Choose the first button of password from buttons that are the least
used for direct dialling (-prolonging time).
Be mindful about conformity of numbers (i.e. when 1 password
contains another.
Note.
When setting parameter
32,33,34
signs # and * and 5,6,7,8,9,0 are not used
because they are not on the button panel
Parameter
Value
Meaning
Basic
35
r aa
command
aa
from phone for switching
relay
r
1 impulse (00-99,*0-*9)
155 266
r
– relay number relay number [1 in SlimDP , 2 in SlimKey]
aa
– command (internal code) for switching on the relay from the phone [2
spaces] /
1
To set the same commands for both relays (internal code) so that both relays
activate at the same time. It is also recommended that the same command is
set for „relay on‟ and „command to disconnection of system (
parameter 43
)
aa=bb
.
/
1
– command is always 2 digits, but if you wish to control relay with a single
digit from the phone, there is an option to input "
*a
", where
a
is a single number
and the star represents an empty space and must be in the first place.
