BRAVE SlimDP
–
User and service manual 21
3.3 Relays regimes
Regime m = 1
(parameter 3111 and 3121)
Action
Note
Parameter
Relay
Evaluation of correct
internal code from
the buttons
3211-3215
According to setting
Day/Night
3311-3315
3411-3415
321*
According to setting
Day/Night
331*
341*
Internal code from
the phone
Option to choose 1 or 2
digits of code
2 digit code is basic and
it is possible to shorten it
by using * in the first
place of code during
programming
351
361
Regime m = 4
Action
Note
Parameter
Relay
Press buttons
Any number of button
other than in 311*
3114
Button set in 311*
3114
Regime m = 6
Action
Note
Parameter
Relay
Press of the button
Any number of button
other than in 311*
3116
-
Button set in 311* or 312*
3116
Note
t1
– time of connection of relay 1
(parameter 371)
t2
– time between impulses of relay 1
(parameter 301)
Tab. 1 Table of relay controls
3.4 Person in the building
The person in the building means the person who is in telephone contact
with the Brave entry system (i.e. Mr Smith).
3.4.1 Outbound call
An outbound call is a call from the Brave system (i.e. started by a visitor).
Once the system has been dialled, a phone inside of the building rings and on
pick up it is possible to talk to the visitor at the door. By choosing a code it is
possible to switch on a relay (
parameter 35
) if it is set in mode m=1, switch
over the Day/Night regime (
parameter 45, 46
) and disconnect the connection
(
parameter 43
). 10sec before the end of the call (
parameter 52
) the system
