BRAVE SlimDP
–
User and service manual 19
3 Door Entry System Operation
The Brave SlimDP
door entry system‟s functions are set by establishing
parameters (see the chapter on parameter programming page 23).
3.1 Signalling overview
Brave SlimDP acoustic signals that occur during its operation. Samples
of sounds can be listened to in the setting programme „BraveSet‟.
State
Tones
Tone frequency
Pick up line type 1
–▄▔▄▔▀–
980-1333-1650
Disconnection of line type 1
–▀▔▄▔▄–
1650-1333-980
Pick up line type 2
–▄▔▀–
800-1067-1200-1333
Disconnection of line type 2
–▀▔▄–
1333-1200-1067-800
Confirmation of command from the phone
––█––
800
Ticking during a call
─┴─┴─
Notice about the end of a call
–▔–▔–▔–
1333
Relay switch signal
─▒▒▒▒▒▒─
Modulated
Entry into programming from the phone
–▄▔▀–
980-1067-1180
Programming from the phone
––▓–▓–––––
Modulated
Parameter confirmation
––█––
800
Entry into programming from the PC
–▄▔▀–
980-1067-1180
Line connection (Reset)
–▔–▄–▔–
1850-1067-1850
Error (generally something is not right)
–▔–▔–▔–▔–▔–
▔–
800
Empty memory (no number is programmed)
–▄▔▄▔▄▔▄▔–
1300-2100
It is useful to know what tones the Brave SlimDP plays during
installation as it will assist in the analysis of its state and operation. The
sounds can be turned off in several levels (
parameters 61,62,63 and 65
).
To play and listen to the sound signals go to:
www.alphatech.cz/zvukova-
signalizace-3.html
