BraunAbility EntervanII Owner'S Service Manual Download Page 62

Page 60

Warranty

Entervan frame and floor structural components

Entervan ramp, door and associated structural components

Entervan electrical components including but not limited to
switches, relays, connectors and solenoids

Entervan electromechanical kneel systems including but not
limited to electric actuator, chain, pulleys and associated hard-
ware

Entervan appearance items including but not limited to interior
floor covering and slide door lowered extension assemblies.

Corrosion Warranty:

Entervan frame, floor and lower door modification metal fabrica-
tion corrosion applies to perforation only.  Entervan lower slide
door modification corrosion applies to outer-body sheet metal and
paint.  Perforation is a rust-through condition such as an actual
hole in the metal.

Years/Miles in Service

Specific Area Covered

36 Months

or

36,000 Miles

(whichever comes first)

In accordance with the Chrysler 7 year/100,000

mile corrosion warranty, The Braun Corporation
warrants to the purchaser of its Entervan conversion
that the metal fabrication on or of the frame, floor
and lowered door extension are free from defects in
material and factory workmanship for a period of 7
years or 100,000 miles on the odometer, whichever
occurs first.  The Braun Corporation further warrants
to the purchaser that the remainder of the modifica-

tions and alterations for associated parts are free
from defects in material and workmanship for a
period of 36 months or 36,000 miles, whichever
comes first.  For clarification purposes, the following
chart outlines The Braun Corporation Entervan
warranty coverage.  Refer to your Chrysler warranty
information booklet for all Chrysler OEM (factory)
limited warranty details.

Both the 7 year/100,000 mile corrosion and the 3

year/36,000 mile warranties described above
commence on the date the conversion is put into
service, providing the warranty registration card is
completed and received by The Braun Corporation
within thirty days of the purchase.

The Braun Corporation agrees to repair or

replace any of its Entervan factory-installed parts
found to be defective within the appropriate warranty

period or mileage.  This warranty also covers the
cost of labor for the repair or replacement of said
parts for one year provided that the repair is autho-
rized by The Braun Corporation and carried out by
an authorized service establishment (a Braun labor
schedule determines the cost allowance for repairs).
The Braun Corporation will not honor any warranty
claim for repairs or replacement of parts unless the
claim is submitted with the appropriate factory
warranty authorization data and the repairs or

7 Year

or

100,000 Miles

(whichever comes first)

Corrosion

Warranty

see *Exceptions at right

* Exceptions:  Cosmetic or surface corrosion (resulting from stone

chips for example) would not be covered or repaired under this
coverage.  If corrosion does not cause holes, and is not the
result of usage and/or environmental conditions, repair cover-
age lasts for 3 years or 36,000 miles, whichever comes first.

Warranty

Summary of Contents for EntervanII


































































Reviews: