manualshive.com logo in svg

BraunAbility EntervanII, Owner'S Service Manual

Share
Download
BraunAbility EntervanII Owner'S Service Manual Download Page 56

Page 54

1. Press MANUAL/AUTO switch 
    to     MANUAL position.
2. Pull detent pin.
3. Pull red handled lever fully.
4. Insert detent pin in lever hole.

Note:  Pull detent pin, return lever 
to original position and press 
MANUAL/AUTO switch to     AUTO 
position before performing electric 
procedures.

KNEEL ACTUATOR
MANUAL RELEASE

Use only if vehicle will not 
raise electrically.

52215

MANUAL

AUTO

Decals

Kneel Actuator Manual Release

Decal #52215

Actual Size:  2-1/2" Wide x 3-1/8" Tall

Posted above kneel actuator manual
release lever assembly mounting bracket.

Warning, Ramp Hazard (Rear)

Decal #52206

Actual Size:  3-1/4" Wide x 1-11/16" Tall

Posted on ramp motor assembly cover.

WARNING

Keep body parts 
and obstructions 
clear of area in 
which ramp 
operates.

52206

WARNING

Keep body parts 
and obstructions 
clear of area in 
which ramp 
operates.

52207

Wall

Warning, Ramp Hazard (Front)

Decal #52207

Actual Size:  3-1/4" Wide x 1-11/16" Tall

Posted on power slide door front
door post interior wall panel.

Power Slide Door

Front Door Post

Ramp Motor

Housing Cover

1. Press MANUAL/AUTO switch 
    to     MANUAL position.
2. Pull detent pin.
3. Pull red handled lever fully.
4. Insert detent pin in lever hole.

Note:  Pull detent pin, return lever 
to original position and press 
MANUAL/AUTO switch to     AUTO 
position before performing electric 
procedures.

KNEEL ACTUATOR
MANUAL RELEASE

Use only if vehicle will not 
raise electrically.

52215

Repair Parts

Summary of Contents for EntervanII


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands