BraunAbility EntervanII, Owner'S Service Manual

Page: 35 / 65

Page 33
Tire Changing
Jack Location and Access
1. Remove spare tire as detailed at left.
2. Loosen and remove the jack storage threaded
retainer stud (turn counterclockwise). Remove
the jack and jack handle.
Spare Tire Access
1. Remove the tire cover.
2. Loosen and remove the retaining nut (turn
counterclockwise). Remove the spare tire.
Tire Changing Instructions
1. Press the dash-
mounted red
KNEEL switch to
the NO
(down)
position. If the rear
of the vehicle is in
the kneeled posi-
tion, the rear of the
vehicle will raise
automatically.
Note: If you have
experienced power
or equipment failure
and the vehicle is in
the kneeled posi-
tion, refer to the
Kneel Actuator
Follow all jacking
and tire changing
instructions and
safety precautions
in the Chrysler-
supplied owner's
manual when chang-
ing a flat tire or
raising the vehicle.
Failure to do so may
result in serious
bodily injury and/or
property damage.
WARNING
Manual Release Instructions on pages 23 and 24
of this manual to raise the vehicle. Kneel Actua-
tor Manual Release Instructions decal #52215 is
posted on the driver side interior wall panel rear
of the sliding door above the red-handled manual
release lever assembly. This decal provides
instructions for overriding the kneel system.
2. Refer to the Chrysler factory-supplied manual
for tire changing instructions.
3. Store and Secure Jack and Tire: Replace the
jack and jack handle in the spare tire mount and
storage cabinet and resecure. Secure the flat tire
to the spare tire mount and storage cabinet.
Compact Spare Tire: The compact spare tire
and wheel assembly (if so equipped), is for
emergency use only ( not for continuous use).
The compact tire should only be used for the
minimum length of time (mileage) required to get
to a tire service center. Have the proper (original
- full size) tire repaired or replaced immediately.
Repair or replace the spare tire if worn or dam-
aged.
Operation
Retaining Nut Jack Storage Threaded Retainer Stud