background image

All illustrations, descriptions and specifications in this manual are based on the latest product information available at the 
time of publication.  The Braun Corporation reserves the right to make changes at any time without notice.

All illustrations, descriptions and specifications in this manual are based on the latest product information available at the 
time of publication.  The Braun Corporation reserves the right to make changes at any time without notice.

When processing any warranty claims (parts, repairs, etc.), all requests must be processed through The 

Braun Corporation Product Support Department.  Call 1-800-THE LIFT during normal working hours.  

Product Support will issue a Return Material Authorization (RMA) number and detail the procedures 

required for processing returns and/or authorizing credit.

The ramp identification information is provided on the Braun Serial No./Series No. identification tag and 

the two warranty cards (supplied with ramp).  The lift identification information must be 

provided when filing a warranty claim or ordering parts.

Return Authorization Procedure

35559    

October 2009

35559    

October 2009

Braun “Worry-Free” Limited Warranty

 

The Braun Corporation (“Braun”) warrants it’s ramp against defects in material and 

workmanship for three years, provided the ramp is installed, operated and maintained in conformity 
with this manual.  Warrantied replacement parts are covered until the expiration of 
the Braun warranty or 90 days, whichever is longer.  The Braun warranty covers the cost of labor 
for any repair or replacement covered under the warranty during the first year of the warranty 
period, if an approved Braun dealer completes the warranty work.
 

The warranty registration card accompanying this ramp is to be completed and returned 

to The Braun Corporation within 20 days of purchase.  If Braun receives the warranty card, the 
warranty period begins on the day the ramp is put into service.  If Braun does not receive the 
warranty card, the parts warranty will expire in three years, and the labor warranty will expire in 
one year from the manufacture date of the ramp.
 

The Braun warranty does not cover any defects in the motor vehicle on which the ramp 

is installed, or defects in the ramp caused by any defect in the motor vehicle.  The warranty does 
not cover work deemed by Braun to be normal maintenance, service, or periodic adjustments 
necessitated by use or wear.  The Braun warranty is null and void if any repair or maintenance work 
is completed during the warranty period using parts not authorized by Braun or if, as determined 
solely by Braun, the ramp is damaged through accident, misuse or abuse, or altered in any way.

 

 

THIS WARRANTY IS IN LIEU OF ALL IMPLIED WARRANTIES, INCLUDING 

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, OR 
OTHERWISE, WHICH ARE HEREBY EXCLUDED.  IN NO EVENT SHALL BRAUN BE LIABLE FOR ANY 
DAMAGES, WHETHER DIRECT, IMMEDIATE, INCIDENTAL, FORESEEABLE, CONSEQUENTIAL, OR 
SPECIAL, ARISING OUT OF OR IN CONNECTION WITH ITS PRODUCT.

 

To contact Braun or to obtain a list of Braun authorized dealers, call 1-800-THE-LIFT or visit 

our web site at www.braunlift.com.
     The 

Braun 

Corporation

     Winamac, 

Indiana

© The Braun Corporation

© The Braun Corporation

Braun RA300 T

ransit Ramp

Braun RA300 T

ransit Ramp

Braun                   RA300 Transit Ramp

Commercial

Braun                   RA300 Transit Ramp

®

"Providing Access to the World"

International Corporate Hdqrs:   P.O. Box 310    Winamac, IN 46996  USA

1-800-THE LIFT

®

       (574) 946-6153       FAX: (574) 946-4670

®

Summary of Contents for BF3255Y-12V












































Reviews: